Rocket motor · 38 × 194 mm

Quero‑Quero

Class H motor for 38 mm rockets, designed for R-Candy. Steady thrust from start to burnout.

R$ 700.00per unit, shipping not included
Production time: 15 business days
Total:

The message opens ready with product, quantity and price. You review and send it; shipping is calculated from your postal code during the conversation.

Propellant not included. We sell the motor hardware — casing, forward closure, nozzle, and retaining rings and O-rings. Propellant is not included and is not sold by Harpia Aerospace.

Datasheet

Simulated values for the motor loaded with three KNSB grains (each 50 mm long, 30 mm in diameter, with a 15 mm core).

Classification
H267
Total impulse
201.4N·s
Average thrust
267.4N
Maximum thrust
300.8N
Burn time
0.75s
Maximum pressure
6.49MPa
ISP
152.3s
C*
908.9m/s

Dimensions and materials

Outer diameter
38mm
Inner diameter
31.7mm
Overall length
194mm
Combustion chamber
152mm
Casing and forward closure
Aluminum6063-T5
Nozzle
Carbon steel
Grains (KNSB)
3 × 50mm
Propellant mass
134.8g
Nozzle throat / exit
6.0 / 18.0mm
Kn initial / average / final
358 / 370 / 349
Thrust versus time chart of the Quero-Quero motor: about 263 N at start, 301 N peak and burnout at 0.75 s
Thrust × time
Combustion chamber pressure versus time chart, peaking at 941 PSI (6.49 MPa)
Chamber pressure × time (PSI; max. 6.49 MPa / 64.9 bar)
Kn versus time chart, between 349 and 370
Kn × time
Grain web thickness versus time chart, from 7.5 mm to zero
Web thickness × time

Simulated curves. Tap a chart to open it at full size.

What's in the kit

Quero-Quero kit: casing, forward closure, nozzle, retaining rings and O-rings
  • Casingaluminum pressure tube
  • Forward closurewith a shallow conical recess in the center, ready to be tapped for an additional attachment point
  • Nozzlecarbon steel
  • 2 retaining ringsDIN 472, 33 mm
  • 2 O-rings28.30 × 1.78 mm

Assembly in five steps

  1. Fit the O-rings on the forward closure and on the nozzle, lubricated with silicone grease.
  2. Lubricate the seat and insert the forward closure into the casing.
  3. Secure the forward closure with the retaining ring, using internal snap-ring pliers.
  4. Load the grains through the open end. A 1 mm internal liner (ceramic fiber paper or EPDM) is recommended; it extends the motor's service life.
  5. Fit and secure the nozzle the same way as the forward closure.

The step-by-step guide with photos is in the PDF datasheet (in Portuguese).

Cleaning and maintenance

After use, disassemble the motor and wash the parts with water and mild soap, or with Flotador. Dry them well and inspect the O-rings and retaining rings, replacing them if worn. The nozzle is carbon steel: dry it completely and apply a thin coat of anti-corrosion lubricant before storage.

Safety

Assembly, storage, transport and operation of rocket motors must be carried out only by trained people, with PPE, away from heat sources and following the guidelines of the Brazilian Model Rocketry Association (ABMF).

About the motor

What it is

The Quero-Quero is the first Harpia Aerospace rocket motor designed for R-Candy propellants: affordable, with excellent performance and sized for high-power flights in 38 mm rockets.

Design and geometry

Designed for three KNSB grains, each 50 mm long with a 15 mm central core. This configuration delivers a consistent thrust curve from start to burnout, with minimal Kn variation across phases, for predictable and stable flights.

Who it is for

For flyers already experienced with R-Candy who want to take the next step, with a well-sized high-power motor made in Brazil.

Learning about R-Candy safely

Quero-Quero